Fuji Elevator Maintenance

Date:2016-02-29

As far as we know, Elevator maintenance and repairing are costly, especially when overtime service is required. Everyone wants to find ways to reduce these two kinds of costs. To reduce the cost of elevator maintenance , the first thing you have to do is to recognize what problem or trouble has happened to elevator. Well, most elevator shutdowns are door related, elevator works only when the door is completely closed, otherwise, it will not run. And there are some door related problems as follows:

1. The door does not close all the time.

2. Door closed while the elevator does not move.

3. Elevator continues to open and close the doors but will not leave the floor to answer a call.

4. The door closed but not completely closed.

In our daily life, with some basic observation skills, some simple problems can be solved which may save you a lot for not calling your elevator service provider. Please pay attention to the following method.

Regularly check the bottom of the door in the door sill for trash or debris. Everything can drop to the door sill, such as pocket change, bottle caps, paper, small screws wedged and so on. The door sill plays an important role in guiding the bottom of the door to keep it from being pushed into the elevator shaft, and guides fit inside a groove in the sill. The clearance in these grooves is so nominal that very small pieces can lead to its jam, and then cause the door close incompletely. Thus, without completely close, the elevator will not run.

Regularly check the door reopening device. The devices that detect if an object is in the door to keep the door from closing on a passage is available to every elevator. These devices vary from elevators to elevators, some are mechanical, some are electronic with infrared beams, and some even have a combination of both. For those elevators who own mechanical door detector, if something placed in the retracted position, it will be get stuck for it believes that someone or something is obstructing the door. At the same ime, dirt in infrared detector lenses will prevent the receiving unit to see the infrared beam, so make sure the detector lenses are clean and out of dirt is necessary.

Regularly check the stuck push buttons. Sometimes it is not the problem of the elevaor door, but the push button. We know that the elevator will remains on the floor with the doors open if the push button was stucked, but pushing it a few times sometimes can release it. However, this is only a temporary fix, this kind of trouble still need to professional repairing.

The above are all simple things we can do to maintain our elevators, but, be aware that elevators are electrical and mechanical devices, great care should be taken when dealing with such devices.

Home   Product   About Fuji   News   Contact Us   Download   Sitemap   

TEL : +86-572-3061088   Fax : +86-572-3061085   E-mail : export@hengdafuji.com
China Elevator SupplierBuy elevatorelevator CompanyEscalator Company

Follow us:
fujihd.net
fujihd.net fujihd.net fujihd.net

Site Map Designed by HWAQ