Hydraulic Drive System for The Elevator


There are many different types of drive systems that a residential elevator can use. One of the most common types is the hydraulic drive system. Thought to be the safest, hydraulic elevators use a hydraulic arm, hydraulic fluid, and a piston to move the elevator cab between floors.

The added safety of an elevator that is on a hydraulic lift system is of great appeal in cases where the elevator is used to transport people. This added safety comes in the form of the cylinder that houses the fluid. Even if the cylinder were to fail and allow the elevator unit to free fall, unless the hydraulic fluid was completely drained from the cylinder, the resistance provided would allow the elevator to safely glide downward. This allows for a greatly reduced chance of injury versus the traditional shaft system that depends on cable supports in cases of elevator failure.

As the elevator industry approved to advance safe and able roped- and direct-action hydraulic elevators, hydraulic and automated engineers were experimenting with assorted added methods of utilizing steam/plunger ability through gearing. A lot of designs complex gearing absorbed to pistons active ambagious drums. The a lot of busy aggregate was the "Vertical Spiral Railway," so called by a abounding artist of the period, Otis Tufts of Boston. His circling spiral lift was installed at New York City's Fifth Avenue in 1861.

A hydraulic elevator is an elevator accessory that raises and lowers through the use of a hydraulic cylinder. A hydraulic elevator relies on aqueous pressures and attrition provided by the hydraulic aqueous to accomplish its functions. When the hydraulic butt is compressed, activity is stored in the compression and as it’s boring appear the elevator rises, decompressing the burden as it does. When the elevator is bargain again, it goes down boring because of the bulk of attrition provided by the hydraulic aqueous aural the cylinder, which is how the butt creates the activity bare for the next raising.

Hydraulic elevators do need more work and maintenance than other residential elevators. They require a pit and machine room that must be built before installation. This means that it will take longer to install, needs more space, and is more intrusive on the home. However, once it is built, it is extremely sturdy and safe, which is what many people like about them. They also require more maintenance than other elevator drive systems. They need to have their hydraulic fluid replaced yearly to keep the Fuji Lift running correctly.

Home   Product   About Fuji   News   Contact Us   Download   Sitemap   

TEL : +86-572-3061088   Fax : +86-572-3061085   E-mail : export@hengdafuji.com
China Elevator SupplierBuy elevatorelevator CompanyEscalator Company

Follow us:
fujihd.net fujihd.net fujihd.net

Site Map Designed by HWAQ